Platinum

Colors

Platinum

About Platinum

Platinum is one of the highest quality materials that we offer and is a popular material for upscale jewelry. It's capable of showcasing intricate details and offers a professional, finished look and feel. Platinum consists of 95% Platinum and 5% Ruthenium.

Common Applications

Women's and Men's Jewelry including Bracelets, Pendants, Rings, Cufflinks, and Tie Bars

Material Properties

Checkmark
High Quality & Professional Finishing
Checkmark
Capable of intricate details
Checkmark
Skin-friendly

Handling and Care

Skin-Friendly
Good Electrical Conductance

Upload a file to get started

Frequently Asked Questions

How long will it take before I receive a model in this material?

Production time depends on the size of the design and the chosen finish. If a model is larger than 56 mm in all dimensions the production time is 15 business days with Priority manufacturing. For smaller models, the production time is 11 business days with Priority manufacturing. The shipping time depends on your location.

How is this material made?

Platinum models are 劲爆体育在线直播 printed using a complex five-step process. First, the model is printed in wax using a specialized high-resolution 劲爆体育在线直播 printer. It is then put in a container where liquid plaster is poured in around it. When the plaster sets, the wax is melted out in a furnace, and the remaining plaster becomes the mold.
Molten Platinum is poured into this mold and set to harden. The plaster is broken away, revealing your new product. The product is then carefully cleaned and hand-polished to give it the trademark Platinum luster. Please be aware that polishing can wear down or fill in very fine details and edges. Polishing also removes a bit of material from your product in order to smooth it out, so the exact volume may be up to 10% smaller than that of your digital model.

More Materials

Professional Finish
Skin-Friendly 925 Silver
Permits everyday wear
Applications
Rings
Cufflinks
Accessories
Technology
Lost Wax Casting
Professional Finish
Good Value
Capable of intricate details
Applications
Pendants
Tie Bars
Bracelets
Technology
Lost Wax Casting
  • Bounding Box
  • Wall Thickness
  • Wires
  • Surface Details
  • Escape Holes
  • Clearance
  • Interlocking Parts
  • Multiple Parts
  • Accuracy
  • Design Tips
  • Pricing

BOUNDING BOX

Maximum
89 × 89 × 100 mm
Minimum
2.4 × 2.4 × 0.6 mm

Your model should be the minimum and maximum bounding box sizes. The maximum bounding box represents the largest model that our printers can produce. The minimum bounding box size is the smallest dimension in which we can print in this material.

WALL THICKNESS

Min Supported Wall Thickness
0.8 mm
Min Unsupported Wall Thickness
0.8 mm

A supported wall is connected on at least two sides. Walls in your model must meet the minimum measurements to ensure it survives the printing and cleaning process. Thin walls are prone to warping during printing and are fragile to clean. Objects that meet the minimum requirements may still be rejected based on the geometry in which case our production team will communicate with you if the design needs improvements and can assist you to strengthen your model.

WIRES

Min Supported Wires
0.8 mm
Min Unsupported Wires
1.0 mm

A geometry considered a wire when its thinner in both unconnected directions than its length. Wires that are under our suggested minimums are prone to breaking in the cleaning process.

SURFACE DETAILS

Min embossed detail
0.4 mm high & wide thick
Min engraved detail
0.35 mm high & wide

We recommend these minimum measurements for details like embossing or engraving, based off of printer resolution.

ESCAPE HOLES

Single Escape Hole Diameter
4.0 mm
Multiple Escape Hole Diameter
2.0 mm

Escape holes allow excess material inside hollow products to be removed.

To create platinum products, a plaster mold is poured around a wax print of your product, and then platinum is cast into the plaster mold. For products with hollow areas, escape holes are essential for two parts of this process. First, the liquid plaster must be able to enter the hole to fill in the hollow area. Then, once the metal is cast, the escape hole must be large enough to allow removal of the hardened plaster from the hollow area. If escape holes are too small, the hollow area may be completely filled in with metal or plaster.
A single escape hole at the end of a cavity will not allow material in the corners near the escape hole to fully escape. So we recommend multiple escape holes at both ends of the cavity.

A single escape hole at the end of a cavity will not allow material in the corners near the escape hole to fully escape. So we recommend multiple escape holes at both ends of the cavity.

CLEARANCE

0.3 mm

Clearance is the space between an two parts, e.g. space between gears or a ball and socket joint.

INTERLOCKING AND ENCLOSED PARTS ?

No.

MULTIPLE PARTS ?

Up to 2 identical parts (like earrings or cufflinks) may be uploaded in the same model file. We cannot accept multiple, unique, non-interlocking parts ordered in the same model file; there should be one file for each unique part.

ACCURACY

Your model may shrink about 0.25 mm plus 2.5% after casting and finishing.

For rings the inner diameter is accurate within +/- 0.1 to 0.15mm. On average, the model shrinks about 2.5% after casting and finishing. We do our best to polish the internal diameter to match your model file.

DESIGN TIPS

Polishing

Polishing gives this material a beautiful finish, but can have an impact on fine details. During the polishing step, fine or sharp-edged details may be polished down or even broken off. Keep this in mind when you're designing fine details.

We can only polish well-reachable surfaces, so tight internal spaces may remain unpolished.

Handling and Care

Platinum can be maintained with most non-abrasive cleaners. Avoid exposing to household bleach, which can cause corrosion and discoloration.

Keep Embossed and Engraved Details Shallow

Engraved details must not be too deep, and embossed details must not be too tall. The width of your detail must be the same or greater than how far it juts out from the surface (or sinks in for engraving). Engraved details that are too deep will cause issues when casting. Embossed details that are too tall are more likely to chip and break during production (unless the detail meets the minimum wall requirements).

Stone holding prongs should be short

Prongs for holding stones cannot be too long without anything connecting them. This connecting beam is to prevent the wax from breaking away. Also, with thin and long prongs, the product will not to be able to hold big stones. Make sure your stone will sit snug and tight.

PRICING

How will the price of my model be calculated?

  • Material Volume - the amount of material* needed to 劲爆体育在线直播 print your product
  • Number of parts - a part is a piece of a model that can be separated from other pieces of the model
  • Production - associated production costs including labor; quality control; machine maintenance; general utilities; and other supporting services required to 劲爆体育在线直播 print your product

* Note that the price of precious metals may fluctuate based on international market demand. This may impact the underlying material price.

What is the minimum price?

The minimum price per model is $125

Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.